Hobart MIG Welding Machine Kit 130

**Hobart 500550 Auto Arc 130 Wire Feed MIG Welding Kit with Welder, Helmet, Regulator, and Cart **

Hobart MIG Welder : MIG Welding Machine Kit

The Auto Arc 130 operates off 115 volt standard household current. It comes ready to weld with or without shielding gas using .023-.035 solid wire or .030-.035 flux cored wire. The 500550 Auto Arc 130 Package a welding cart, welding helmet and fixed flow MIG regulator kit. With an amperage output range of 30 – 130, it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires. This MIG welding machine kit comes with everything you need to get started MIG welding now, it’s a great little MIG welding machine for MIG welding  up to 3/16 inch steel and auto body panels.

  • Welds 22 gauge up to 3/16 inch steel
  • Proven built-in wire feeder with quick-release drive roll lever
  • Built-in contactor eases use and is an excellent safety feature which makes wire electrically “cold” when not welding.
  • Four output voltage settings with wire feed tracking provide quick and easy adjustment for different materials and thickness.
  • Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6 mm) and .030 – .035 in. (0.8 – 0.9 mm) wire
  • Self-resetting thermal overload and motor protection

Hobart MIG Welder : MIG Welding Machine Kit Includes:

  • Comfortable H-9B gun, 8 ft. (2.4 m) with liner for .023–.035 in. (0.6–0.9 mm) diameter wire
  • Work clamp and cable
  • Sample spool of .030 in. (0.8 mm) self-shielding flux cored wire
  • .030 in. (0.8 mm) contact tips
  • Spool shaft to accommodate 4 in. spools. (Optional hub kit available for 8 in. spools.)
  • Gas valve
  • Power cord with plug
  • Weld set-up chart
  • Owner’s manual with parts lists, installation, operation, maintenance and wire welding guidelines
  • Gas Regulator
  • Helmet
  • Welding  Cart

Hobart MIG Welder : MIG Welding Machine Kit Features:

  • The Auto Arc 130 operates off 115-volt household current
  • It comes ready to weld, without shielding gas, using .030–.035 in. (0.8–0.9 mm)flux cored wire
  • For greater versatility, the Auto Arc 130 includes a gas valve for welding with.023–.030 in. (0.6–0.8 mm) solid wire and gas shielding
  • Use C-25 gas (75% Argon/25% CO2)on 22 gauge–1/8 in. steel for a cleaner weld with less spatter
  • Use Tri-Mix gas and stainless wire for welding on 16 gauge–1/8 in. stainless steel

Hobart MIG Welder : MIG Welding Machine Kit Specifications

  • Rated Output at 20% Duty: 85A @ 17.5 VDC
  • Cycle: 51A @ 21VDC (CSA Rating)
  • Current Range: 30 – 130 Amps
  • Max Open Circuit Voltage: 27 Volts
  • Wire Feed Speed Range w/o load: 0 – 500 Inches per Minute
  • Amps Input @ 115V: 20 (15 is CSA rating)

Hobart MIG Welder : MIG Welding Machine** Dimensions**

  • Height: 16-7/8″
  • Width: 9-7/8″
  • Depth: 12-1/8″

Buy the Hobart Auto Arc 130 Wire Feed MIG Welding Kit with Welder, Helmet, Regulator, and Cart