a. Weld symbols are used to indicate the welding processes used in metal joining operations, whether the weld is localized or “all around”, whether it is a shop or field weld, and the contour of welds. These basic weld symbols are summarized below and illustrated in figure 3-3. b. Arc and Gas Weld Symbols. See figure 3-3. c. Resistance Weld
Read more →A distinction is made between the terms “weld symbol” and “welding symbol”. The weld symbol (fig. 3-3) indicates the desired type of weld. The welding symbol (fig. 3-2) is a method of representing the weld symbol on drawings. The assembled “welding symbol” consists of the following eight elements, or any of these elements as necessary: reference line, arrow, basic weld
Read more →Welding cannot take its proper place as an engineering tool unless means are provided for conveying the information from the designer to the workmen. Welding symbols provide the means of placing complete welding information on drawings. The scheme for symbolic representation of welds on engineering drawings used in this manual is consistent with the “third angle” method of projection. This
Read more →a. Full Lines (A, fig. 3-1). Full lines represent the visible edges or outlines of an object. b. Hidden Lines (A, fig. 3-1). Hidden lines are made of short dashes which represent hidden edges of an object. c. Center Lines (B, fig. 3-1). Center lines are made with alternating short and long dashes. A line through the center of an
Read more →a. Title Block. The title block contains the drawing number and all the information required to identify the part or assembly represented. Approved military prints will include the name and address of the Government Agency or organization preparing the drawing, the scale, the drafting record, authentication, and the date. b. Revision Block. Each drawing has a revision block which is
Read more →a. Drawings. Drawing or sketching is a universal language used to convey all necessary information to the individual who will fabricate or assemble an object. Prints are also used to illustrate how various equipment is operated, maintained, repaired, or lubricated. The original drawings for prints are made either by directly drawing or tracing a drawing on a translucent tracing paper
Read more →